KT-10 S/C Magnetic Susceptibility/Conductivity Meter

KT-10 S/C Magnetic Susceptibility/Conductivity Meter

GE5730
$6,695.00 Each

The KT-10 S/C Magnetic Susceptibility/Conductivity Meter allows users to simultaneously measure the Magnetic Susceptibility and Conductivity of rock samples or drill cores and include a host of features such as the ability to input depth correlation information, a correction for split and full cores, a data management/visualization software and the GeoVision Android App. Comes with storage case and two AA batteries.

KT-10 STANDARD FEATURES:
Click here


ADDITIONAL FEATURES of the KT-10 S/C MODEL:

Can be used in three different configurations:
- Magnetic susceptibility only
- Absolute Conductivity only
- Magnetic susceptibility and conductivity simultaneously

Wide Range Absolute Conductivity Meter:
· Both configurations have been calibrated using a multi-point algorithm to ensure accurate measurements between inductive and galvanic methods. They can measure conductivities from 1 to 100,000 S/m, while maintaining a sensitivity of 1 S/m.

High Magnetic Susceptibility Sensitivity:
· The KT-10 S/C has a maximum sensitivity of 1 x 10-6 SI Units on smooth surfaces for magnetic susceptibility measurements.

Depth Correlation:
· The KT-10 S/C large internal memories allow the user to input information to correlate every core measurement to its depth. The user can enter information such as borehole I.D., box number, the number of rows in a box, start and end depths, as well as depth intervals. In the Scanner mode, depth intervals can be recorded with the push of a button. All readings between depth intervals are interpolated into the data for reference.

Split and Full Core Corrections:
· The KT-10 v2 includes a real time diameter correction for both split and full cores. The user can select from a range of drill rod diameters (AQ, BQ, NQ, HQ and PQ) or non-standard ones from 2.4 to 12 cm.

**How often should I calibrate my Magnetic Susceptibility/Conductivity Meter?

All units are factory calibrated before shipping to you. This means that as long as the meter does not suffer from serious physical damage (i.e. the measuring coil gets broken), periodic calibration should not be required. If you are in doubt about your unit's accuracy, you can easily calibrate it for magnetic susceptibility measurements yourself.
Option 1 - Purchase a set of magnetic susceptibility calibration pads for ultimate peace of mind.
Option 2 - Use a rock with a flat surface and thickness of at least 2 inches, which is homogeneous in its magnetic susceptibility. Draw a circle on the rock to make sure you always take the measurement at the same location, same angle and ideally same temperature (if possible).

**How often should I calibrate my Magnetic Susceptibility/Conductivity Meter?

All units are factory calibrated before shipping to you. This means that as long as the meter does not suffer from serious physical damage (i.e. the measuring coil gets broken), periodic calibration should not be required. If you are in doubt about your unit's accuracy, you can easily calibrate it for magnetic susceptibility measurements yourself.
Option 1 - Purchase a set of magnetic susceptibility calibration pads for ultimate peace of mind.
Option 2 - Use a rock with a flat surface and thickness of at least 2 inches, which is homogeneous in its magnetic susceptibility. Draw a circle on the rock to make sure you always take the measurement at the same location, same angle and ideally same temperature (if possible).

OTHER KT-10 MODELS:

· KT-10 Plus: Increases magnetic susceptibility range to 10 SI units and includes iron ore concentration estimates (%) directly from the display.
Click here
for KT-10 Plus Features.

* Other models such as the KT-10 Plus S/C, the KT-10 S/Cx, the KT-10 Plus S/Cx, or the KT-10 with rectangular coil may be Special Ordered. The rectangular coil is beneficial for measuring core samples with small diameters as they do not need to be removed from the core box for measurement. The circular and rectangular coils are not interchangeable.

Please call our office or e-mail us for special orders. Tel: 604-253-2685 or 1-800-663-3735 (toll-free in North America)

Email us at: sales@deakin.com

You may also like:

Cart Summary
Your cart is empty.
Yikes! You have a very old browser. For security and a good experience please upgrade your browser.

Click here for a list of extra browsers and update links.

×