**SPECIAL ORDER ITEM (See conditions in our Customer Service section)
The KT-20 Plus is a handheld console that measures the magnetic susceptibility of a geological sample or core in either SI or CGS units. The KT-20 Plus is able to measure iron ore samples and cores up to 10 SI units while providing all the benefits
offered by the standard KT-20 console. With this extended range and the appropriate calibration curves, it is now possible to obtain the concentration estimate of iron ore directly from the KT-20 Plus which allows the operator to speed up the screening of samples to be sent to the lab for chemical assay.
SENSORS SOLD SEPARATELY (see item links below). A wide range of sensors with different shapes and frequencies can be used with all KT-20 models. Users can interchange the sensors on the console, allowing all models of the KT-20 to be adapted to different sizes and types of samples, or used in various applications. Please see information below for available sensors.
The KT-20 console includes a number of built-in features to increase the amount of information that can be added to a measurement record. These features include a GPS receiver to obtain coordinates of the measurement, digital camera to photograph the sample, a microphone to record voice notes, and a virtual keyboard to enter text notes.
KT-20 STANDARD FEATURES:
Click here
ADDITIONAL FEATURES of the KT-20 PLUS MODEL:
· Increased Measurement Range: The KT-20 Plus has an increased range of operation, up to 10 SI units. Enables measurement and analysis of samples with high magnetite content.
· Direct Iron Ore Concentration Measurement Estimates:Can be obtained from the KT-20 Plus by using the appropriate calibration curves.
**How often should I calibrate my Meter?
All units are factory calibrated before shipping to you. This means that as long as the meter does not suffer from serious physical damage (i.e. the measuring coil gets broken), periodic calibration should not be required. If you are in doubt about your unit's accuracy, you can easily calibrate it for magnetic susceptibility measurements yourself.
Option 1 - Purchase a set of magnetic susceptibility calibration pads for ultimate peace of mind.
Option 2 - Use a rock with a flat surface and thickness of at least 2 inches, which is homogeneous in its magnetic susceptibility. Draw a circle on the rock to make sure you always take the measurement at the same location, same angle and ideally same temperature (if possible).
OTHER KT-20 MODELS:
· KT-20 S/C: Measures magnetic susceptibility (standard range) and also measures electrical conductivity (standard range).
Click here for KT-20 S/C Features.
* Other models such as the KT-20 Plus S/C, the KT-20 S/Cx, the KT-20 Plus S/Cx, or the KT-20 Pro sensor (which increases the capabilities of the KT-20 IP sensor) may be Special Ordered.
Please contact us at sales@deakin.com or call us at 1-604-253-2685 for information, quotes, or special orders.